Menino Arts Center Framing Guidelines
SIZE, FRAME AND WIRE REQUIREMENTS:
IF YOUR WORK IS NOT PROPERLY FRAMED OR WIRED YOU WILL BE ASKED TO REFRAME THEM OR REWIRE THEM AT DROPOFF.
- All 2D work must be properly framed and wired.
- The MAC Gallery hanging system requires the work be framed EXACTLY as indicated. Please redo previously wired work as required.
- The screw eyes with wire should be placed as close to the top of the frame as possible, at least within the top 1/8, (NOT 1/3) from the top of the frame.
- Try to wire with a D-ring if possible. They lay flatter, or put your screw-eyes on the inside of the stretcher.
- The wire and 1.5″ hanging hook must not extend above the top of the piece when hung. Take excess slack out of wire if needed.
- No sawtooth hangers.
- Frames must be sturdy and in good hanging condition.
- Glass and mats must be clean and free of finger prints.
- Work will be inspected at drop-off. Any framed work not wired to MAC requirements will not be displayed. Rewired frames will be at the cost of artist.
2D SIZE REQUIREMENTS: Maximum size is Height 40″ x Width 40″

3D ARTWORK SIZE REQUIREMENTS:
Three-dimensional work and artist books will be accepted to be displayed on pedestals.
Please contact the MGNE Exhibitions Committee to consult on installation restrictions and guidelines for unframed and/or large sculptural works at exhibitions@mgne.org.
